Cirrus
Overview:
Kelly Aerospace Thermal System’s THERMACOOL All-Electric Air Conditioning technology is now FAA Certified for the Cirrus SR20/22 series aircraft. The highly reliable and efficient 28 volt brushless DC motor /compressor which runs on either a ground power supply or the aircraft electrical system provides a 20° F.+ drop in cabin temperature within 5 minutes.
Features:
Ground pre-cooling with GPU
20° plus temp drop in 5 minutes
No taxi, take off, landing, or in-flight restrictions
No impact on cruising speeds
Easy-read digital temp / fan control – set it and forget it
Full use of the baggage area
Very efficient cooling – only 55 amps peak power
Light weight – only 52 lbs. installed
Reliable and efficient hermetically-sealed, brushless DC compressor – R134A
CG – moves only 2” aft
One week installation time
FAA STC No. SA04037CH – Kit No. KATS-13-003
Pre-cooling is Easy
Being electric, THERMACOOL can also pre-cool your Cirrus on the ground with a ground power supply (GPU). Just open the door, turn on the Master, touch the A/C ‘ON’ button, set the desired temperature and shut the door. It’s that easy and in 5 minutes or less the cockpit will be 20 degrees cooler. Your lineman can even do it for you. Get out of your cool car and into your COOL Cirrus!
No Operating Restrictions
You never have to turn off your THERMACOOL. It can be operated during taxi, takeoff, cruise, and landings since it is operating within the design parameters of the aircraft alternator and electrical system. . . another pilot workload reduction.
Built-in, Not Added-on
Refreshing cool air is distributed to each seat in the cabin through an all new ducted headliner which duplicates the original factory interior appearance.
KATS Factory Installation Facilities
KLNN – Willoughby, OH, KMGM – Montgomery, AL, KIDP – Independence, KS, KRDM – Redmond, OR.
Plus the option of KATS’s Approved Independent Installers.
Keep All Your Cabin Space
A/C system components are mounted in the tail cone without impacting cabin or baggage area space. . . and it only moves the CG about 2” aft. The system components are mounted through the airframe access panel located on the right-hand aft fuselage. Condenser air inlet and outlet ducts are both vented through the one access panel limiting the number of airframe penetrations.
NOTE: For the SR22 serial number 842 (G1) and before, which do not have the fuselage access panel, Kelly Aerospace Thermal Systems has an FAA/STC approval for the creation of an access hole to accommodate the installation.
Set it and Forget it
A compact, panel mounted, auto-dimming and sunlight-readable digital controller lets you set your desired temperatures and fan speeds and the system does the rest. Once the cabin reaches the ‘set’ temperature the system automatically adjusts the cooling compressor and the fan to maintain it. . . just set it and forget it!
Reliability and Efficiency
The 12,000 BTU hermetically sealed, 28 volt brushless DC Motor/Compressor is the ‘heart’ of the system and has the reliability of your home refrigerator. Its light weight and close proximity to the other A/C components results in a total installed system weight of just 52 lbs., and draws only 45 amps during normal operation. The sealed air distribution ducting and 440 cfm evaporator fan insures plenty of cool cabin airflow to each seat in the cabin.
Tech Data and Customer Resources
For more information, including Tech Data documentation, please reference our Support page.